This update adds improved color reproduction using several Fujifilm camera models, support for the Fujifilm X-T30 and Ricoh GR III cameras. This update was released as of March 25, 2019.
Improvements
Improved color reproduction when using a specific FILM SIMULATION with the following cameras: Fujifilm X100F, X-A5, X-E3, X-Pro2, X-T2, X-T20, X-T100, XF10; target modes: PROVIA/STANDARD, Velvia/VIVID, ASTIA/SOFT, CLASSIC CHROME, PRO Neg. Hi, PRO Neg. Std (*2)
New Camera Support
[NEW] Fujifilm X-T30 (*1)
[NEW] Ricoh GR III
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
To enable this fix, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu
This update adds general fixes, support for the Nikon COOLPIX A1000 and Olympus OM-D E-M1X cameras. This update was released as of February 25, 2019.
Improvements
[Fixed] [macOS] Some shortcut keys set in "Shortcut keys settings" do not work
[Fixed] Other small fixes
New Camera Support
[NEW] Nikon COOLPIX A1000
[NEW] Olympus OM-D E-M1X
Developer Studio 8 is no longer the current version and this release is a courtesy to our current customers. The download for this version is not available on Dropbox but only directly from the local links.
This update adds general fixes, support for the Leica D-LUX7 and fixes for RAW files from Olympus and Canon cameras. This update was released as of February 7, 2019.
Improvements
[Fixed] RAW shot with Olympus E-M1 which updated to the latest firmware cannot open
[Fixed] Some RAW shot with Canon EOS Kiss M / M50 or EOS R were loaded extremely dark. To enable this fix, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu.
[Fixed] Effect of "Portrait beautification" greatly differed between preview screen and development result when adjusting "Portrait beautification" and "Add noise" parameters at the same time.
[Fixed] Parameters of "Monochrome controller" recorded in the developed JPEG or TIFF could not be read using "Load development parameters".
[Fixed] Other small fixes
New Camera Support
[NEW] Leica D-LUX7
Developer Studio 8 is no longer the current version and this release is a courtesy to our current customers. The download for this version is not available on Dropbox but only directly from the local links.
This update adds a key fix plus supports two more Sony cameras. This update was released as of January 17, 2019
Improvements
[Fixed] effects of the "Spotting tool" not applied correctly for developed images when developing images from DNG files shot with Pentax "Pixel Shift Resolution"
New Camera Support
[NEW] Sony DSC-HX95
[NEW] Sony DSC-HX99
Developer Studio 8 is no longer the current version and this release is a courtesy to our current customers. The download for this version is not available on Dropbox but only directly from the local links.
This update adds several fixes, compatibility with Canon CR3 RAW files and new Canon and Leica cameras. This update was released as of December 20, 2018.
Improvements
[Fixed] Display rating set for Canon CR3 RAW files
[Fixed] Development parameters of unedited categories may also be copied pasting development parameters (*1)
[Changed] Checkbox of the edited categories in the "Development parameters applied by taste" checklist are checked when opening the "Add parameters taste" dialog to add an all categories taste
New Camera Support
[NEW] Canon PowerShot SX70 HS
[NEW] Leica M10-D
[NEW] Leica M10-P
OS X v10.6.8 or earlier support dropped; please use SILKYPIX Ver.8.1.25 or earlier.
Release Notes
Affects "Paste development parameters", "Paste temporary development parameters", and "Paste the last editing development parameters". Resolves the problem that unedited development parameters with a different initial value set for each image by the "dynamic default" function are copied when all parameters in the category are unedited.
This update adds several improvements plus supports new Canon, Leica and Panasonic cameras. This update was released as of November 1, 2018.
Improvements
[Fixed] Development parameters of monochrome controller are not loaded correctly when loading the development parameters adjusted with both the monochrome controller and the spotting tool
[Fixed] Changes to IPTC information tastes made in the "Edit settings tastes" dialog not saved correctly
[Fixed] Other small fixes
New Camera Support
[NEW] Canon EOS Kiss M / M50 (*1)
[NEW] Canon EOS R (*1, 2)
[NEW] Leica C-LUX
[NEW] Panasonic DC-LX100M2 (*3)
OS X v10.6.8 or earlier support dropped; please use SILKYPIX Ver.8.1.25 or earlier.
Release Notes
This camera is unsupported on 32-bit Windows
The color reproduction in highlight areas may not be performed correctly when adjusting the white balance of RAW shots with multiple exposure
"FILM SIMULATION" is supported and an available film simulation can be selected
This update adds several important fixes, support for MacOS Mohave 10.14, and Fujifilm and Nikon cameras. This update was released as of October 5, 2018.
Improvements
[MacOS] [Added] Mojave 10.14 Support
[MacOS] [Fixed] Settings of "Imprint data settings" not saved when adding a taste of "Batch development settings"
New Camera Support
[NEW] Fujifilm X-T3 (*1)
[NEW] Nikon D3500
[NEW] Nikon D 7
[NEW] Nikon Coolpix P1000
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
This update adds several important fixes plus FujiFilm XF10 and Sony DSC-RX100M6 camera support. This update was released as of September 13, 2018.
Improvements
[Fixed] hue shifted in the overlapped filter areas of the "Partial correction tool" when the total "Saturation" of the areas became smaller than -100%
[Fixed] slider names not switching in the "Sharpening" sub-control "Type" drop down list
[Changed] initial setting of white balance in Leica DIGILUX 2 from "Fine (5200K)" to "Camera settings" (*2)
[Changed] limitations that the upper limit of the edit box on the shadow side is 127 and the lower limit on the highlight side is 129 in the "Level correction" of the "Tone curve" sub-control (*3)
Other small fixes
New Camera Support
[Added] Fujifilm XF10 (*1)
[Added] Sony DSC-RX100M6
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
To enable, delete temporary files, select menu [Help] – [Troubleshooting] – [Delete temporary files]
This update adds minor fixes plus addition of the Fujifilm X-T100. This update was released as of June 26, 2018.
Improvements
Fixed a problem that the information of the cropping area setting is not saved correctly when the cropping area is set to the maximum size in some RAW images where the initial state of the cropping area is adjusted according to the aspect ratio set on the camera
Other small fixes
New Camera Support
[Added] Fujifilm X-T100 *1
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
This update adds support for several Canon cameras, Panasonic and Pentax cameras. This update was released on April 25, 2018.
New Camera Support
[Added] Canon EOS Kiss X90
[Added] Canon EOS Rebel T7
[Added] Canon EOS 2000D
[Added] Canon EOS 1500D
[Added] Panasonic DC-GH5S (*1*2)
[Added] Pentax K-1 Mark II (*3*4)
Release Notes
"Photo Style/Camera color" is supported and an available photo style can be selected
"V-Log L" of the "Photo Style" is not supported
For RAW images shot with "Pixel Shift Resolution", several features such as a demosaicing sharpness are unavailable
RAW images shot with "Image Stabilization On" mode of "Pixel Shift Resolution" are not supported. They would be loaded as the RAW images shot with "Pixel Shift Resolution" turned off
This update adds support for two new cameras and improvements for Sony cameras and the Canon PowerShot G1 X Mark III.
Improvements
[Improved] Support ARQ RAW format with "Pixel Shift Multi Shooting" on supported Sony cameras. (*3)
[Fixed] Image processing of RAW shot with Canon PowerShot G1 X Mark III (*4)
[Fixed]Other small fixes
New Camera Support
[Added] Fujifilm X-A5 and X-A20 (*1)
[Added] Panasonic DC-GF10 / GF90 (*2)
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
"Photo style/Camera color" is supported and an available photo style can be selected
The some functions limited; "Demosaicing sharpness" not available
To enable this fix, you must delete temporary files through the menu. To delete temporary files, select [Help] - [Troubleshooting] - [Delete temporary files] from the menu
This update adds new camera support for Canon and Leica cameras and several key fixes.
Improvements
[Fixed]"Image properties" data not be saved in the images developed from RAW images shot with Kodak DCS Pro SLR/n, SLR/C, 14/n, 14/nx, or Samsung WB5000
[Fixed]RGB 16 bit TIFF images developed from RAW images shot with Kodak DCS Pro SLR/n, SLR/C, 14/n, 14/nx, or Samsung WB5000 not displayed correctly
[Fixed] Main window size when switched from Preview mode to Thumbnail mode
This update adds new camera support for Canon, FujiFilm and Leica cameras as well as official macOS 10.13 "High Sierra" support.
Improvements
RAW images taken at the specific ISO with Canon EOS 9000D / 77D, EOS Kiss X9 / Rebel SL2 / 200D, or EOS Kiss X9i / Rebel T7i / 800D have a strong magenta color cast. (*2)
Support macOS High Sierra 10.13
Other small fixes
New Camera Support
[Added] Canon EOS M100
[Added] Fujifilm X-E3 (*1)
[Added] Leica S (Typ 007)
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected
To enable this fix, you must delete temporary files. To delete temporary files, select menu Help > Troubleshooting > Delete temporary files