This is an improvement and new camera support update to SILKYPIX DS 11, released as of June 29, 2023.
Improvements
[Update] Lensfun lens database file included with this software
New Camera Support
Fujifilm X-S20. (*1, 2, 3)
Nikon Z 8. (*2, 4)
Sony ZV-1 II
Release Notes
"FILM SIMULATION" is supported and an available film simulation can be selected.
HEIF (HIF) format is not supported.
"Clear view" of the demosaicing engine is not supported.
In operating environments where the CPU does not support SSE4 and AVX2 instructions, RAW images shot with RAW Recording "High efficiency★" and "High efficiency" are not supported
This is a fix update of SILKYPIX DS 11, released as of December 12, 2022.
Improvements
[Fix] RAW shots with "Lossless Comp (M)" and "Lossless Comp (S)" on Sony A1 and A7IV
[Fix] 35mm conversion focal length calculated properly in RAWs shot with the APC-C size on the Sony A1. This fix affects the initial values of Sharpening, Noise reduction, Angle, etc. by Dynamic Default in the relevant RAW.
[Fix] Other small fixes.
New Camera Support
Canon EOS R10 (*1, *2)
Fujifilm X-H2 (*3, *4)
Fujifilm X-H2S (*3, *4)
OMDS OM-5
Release Notes
RAW images shot with "RAW burst mode" are not supported.
HEIF (HIF) format is not supported.
"FILM SIMULATION" is supported and an available film simulation can be selected.
"Clear view" of the demosaicing engine is not supported.
This is a fix update of SILKYPIX DS 11, released as of September 19, 2022.
Improvements
[Fix] White balance color temperature may not be reproduced properly when opening a RAW shot with the white balance set to "Daylight" on the Canon EOS R5. (*3, 4)
[Fix] The initial values of Sharpening, Noise reduction, etc. by Dynamic Default were not changed for each ISO sensitivity when RAWs shot with the Canon EOS R3 were opened. (*3)
[Fix] Adjusted brightness when opening DNG format RAWs taken with the Pentax K-3 Mark III. (*3)
[Fix] Develop and Batch develop to fail when adjusting HDR/Dodge/Color Burn/Highlight/Shadow and White Balance at the same time for Apple ProRAW.
[Fix] "NOSTALGIC Neg." was not present in the list of selectable FILM SIMULATION for RAWs shot with Fujifilm GFX50S II, GFX100, and GFX100S.
[Fix] Adjustment result was not correctly reflected in the preview and development result when the White balance "Auto (Natural)" and White balance adjustment were applied to JPEG and TIFF images at the same time.
[Fix][macOS]The development process of the preview was not completed when "Fast rendering (Coarse preview)" was set as the Preview rendering method in the Display settings dialog.
[Fix] Other small fixes.
New Camera Support
Canon EOS R7. (*1, 2)
Nikon Z 30
Release Notes
The color reproduction in highlight areas may not be performed correctly when adjusting the white balance of the RAWs shot with multiple exposure.
HEIF (HIF) format is not supported.
To enable this fix, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu.
Even in RAWs shot with a white balance other than "Daylight", the initial color temperature values may change slightly before and after this problem is fixed.
This is a fix update of SILKYPIX DS 11, released as of July 19, 2022.
Improvements
[Fix] Imprint data is not applied to the batch development images when the imprint data is created and edited from the [Edit data...] button in the Batch develop selected images, Batch develop marked images, and Batch develop settings dialogs
New Camera Support
GoPro HERO7 Black, HERO8 Black, HERO9 Black, and HERO10 Black
This is a fix update of SILKYPIX DS 11, released as as of April 21, 2022.
Improvements
[Fix] Black dots sometimes appeared in highlights when the "Clear view" demosaicing engine is applied
[Fix] Thumbnails not sorted when OK was clicked without changing the settings in the Sort thumbnails dialog.
[Fix] Changing any settings and restarting SILKYPIX after adding or editing parameters tastes, added or edited parameters tastes disappear.
[Fix] Photo Style selections for "L.Monochrome S" and "L.ClassicNeo" were not saved in the development parameters for RAW images where Panasonic's "L.Monochrome S" and "L.ClassicNeo" Photo Style were available in the camera.
Developer Studio 11 Ver.11.1.3.2 Windows Version Release
This is a fix update to SILKYPIX DS Pro11, released as of March 2, 2022.
Improvements
[fix] application may be forced to quit due to insufficient memory when loading a large number of RAW shot with RAW Recording "High efficiency★" and "High efficiency" of Nikon Z 9
[fix] image information, etc may not be saved correctly when developing images with the Gradation "Hue" or "Saturation" selected in the Advanced tab of the Fine color controller sub-control
[fix] Import from media dialog may not display when "Launch the 'Import from media' dialog when inserting a removable disk" was set to OFF in the Function settings dialog.
New Camera Support
none
Release Notes
"[fix] application may be forced to quit due to insufficient memory when loading a large number of RAW shot with RAW Recording "High efficiency★" and "High efficiency" of Nikon Z 9" is also rolled back to support SILKYPIX 10.0.18.1 and 10.1.18.1.
Developer Studio 11 Ver.11.1.3 Windows Version Release
This is the first update of SILKYPIX DS Pro11, released as of February 15, 2022.
Improvements
[fix] Fixed a problem that the Color representation drop-down in the Color sub-control did not display any options in RAW images where Panasonic's "L.Monochrome S" and "L.ClassicNeo" Photo Style were available in the camera
[fix] [WIN] Fixed a problem that the settings in each dialog were not reflected when the File output settings dialog was opened from the Develop, Batch develop selected images, and Batch develop settings dialogs
[fix] [WIN] Fixed a problem that the edited result was not displayed immediately in the preview when creating or editing Imprint data in the Develop dialog.
New Camera Support
Canon EOS R3 (*1)
Nikon Z 9 (*2)
Release Notes
HEIF (HIF) format is not supported
In operating environments where the CPU does not support SSE4 and AVX2 instructions, RAW images shot with RAW Recording "High efficiency★" and "High efficiency" are not supported